Concrete cutting in Seymour IN - straight, clean cuts right where you need them
Need a doorway in a concrete wall or a bad section out of your driveway? We'll cut it and say up front what's included.
- Fully licensed and insured.
- Free quotes on site.
- We reply within 1 business day.
What's involved in concrete cutting, from the first cut to hauling the pieces off?
Concrete cutting means sawing through a driveway, sidewalk, floor or wall with a diamond-blade saw so a broken section can come out, a pipe can go under or a door can go in. Seymour Concrete does this work in Seymour, IN and the cities around it, and it's usually the first step of a bigger job like a patch, a new pour or a remodel.
Most calls start with something that has to come out or go through, like a sunken driveway panel or a new drain line across a garage floor. The price moves with how thick the concrete is, whether there's rebar inside it, the steel bars that hold a slab together, whether it's a wall or a slab, and whether you want the cut pieces hauled away or just the cuts. The schedule turns mostly on what comes after, like the new pour, and on whether a wall or structural slab needs a scan before we cut it. If the cut is making room for a new section, it usually leads right into concrete driveway building. I'll put your own figure in a written estimate that says what's included.
How do you know it's time to call for concrete cutting?
A sunken driveway section
One panel of your drive or walk has dropped or broken while the rest sits fine. That usually means the dirt under that piece washed out or settled, and a clean saw cut lets it come out without tearing up good concrete next to it. The longer it sits, the more water gets under the panels beside it.
A wall where you want a door
You're planning a door or window in a concrete or block basement wall, or a wider opening in an old one. That's a saw job, because breaking it out by hand chips and cracks the wall around the opening, and getting the cut scheduled early keeps the framer and the door from waiting on it.
A new line under the floor
You need a drain, water line or conduit run across a garage or basement floor. That means a narrow strip cut, broken out and patched later, and leaving it to the last minute usually holds up the plumber or electrician.
Often paired with concrete cutting
Concrete driveway building
When a cut takes out a broken or sunken section, the new piece has to be poured on a packed base so it sits even with the drive.
Concrete patio construction
Cutting back an old slab or a strip along the house is often the first step toward a new patio that sheds water away from the house.
How we do concrete cutting
We start by marking every cut line with you so there's no guessing where the saw goes. Then we make the cuts, break out and load the pieces if that's part of the job, and clean up before we leave. Our estimate says plainly whether hauling away the cut pieces is included or just the cuts, because some cutters saw the panels and leave them sitting right where they were, and you can only compare quotes fairly when you know which one you're getting.
Cutting is often just the first half of the job. When a bad section of drive comes out, we can pour the new piece as part of concrete driveway building, and cutting back an old slab can clear the way for concrete patio construction. If you'd like the cut and the pour on one estimate, just ask and I'll write it that way.
Wet cutting outdoors
This suits driveways, sidewalks, patios and garage floors, because water at the blade holds down the fine silica dust concrete throws off and carries the grit out of the cut. That water leaves as a gray, alkaline slurry that usually shouldn't just run to a drain, so it's fair to ask any crew how they collect it.
Dust caught at the saw indoors
This suits a basement or a room you live in, because inside a finished home we can catch the dust at the saw instead of using water. It's slower than wet cutting, but there's no slurry on your floor and your rooms stay clean.
Get a written estimate for your concrete cut
We'll reply within one business day to set a time for me to come out. The on-site estimate is free with no obligation, and you're welcome to call (812) 271-8146 instead.
Call (812) 271-8146Why Seymour homeowners call Seymour Concrete for cutting
The owner writes every estimate
I come out to look at the job myself, and our crew of experienced finishers does the work with me on site. The person who told you what's included is the same one standing there when the saw starts.
Fully licensed and insured
We're fully licensed and insured. That's worth checking with anyone who brings a saw to your house, since cutting goes through walls and floors you live with.
Cutting and pouring since 2017
We've been in business since 2017, and most of our work is flatwork, the driveways, patios, walks and steps around a house. That means we know how a cut edge has to meet the new concrete that goes in after it.
Based in Seymour, working nearby
We're based in Seymour and work across the cities around it, including Columbus, North Vernon, Scottsburg and Salem. A lot of what we cut around here is older driveways and basement floors, so we're used to concrete that's been patched a time or two.
On a cutting job, the thing to settle first is exactly what you're paying for, so ask for an estimate and we'll put it in writing.
What happens when you call about concrete cutting?
Tell me about the cut
When you call or send the form, I'll ask where the cut goes, whether it's a wall or a slab, about how many feet it runs and whether the pieces should go. Then we set a time for me to come look at it with you.
Walk the job together
I walk the site with you, go over the ways it can be cut and answer whatever you ask. Then I send a written estimate that says what's included, so you know the whole price before a saw starts.
Cut, clean up, walk through
Once you say go, I'm on site with the crew from the first cut to cleanup. Before we leave, we walk the finished work together so you can see every edge.
Common questions
How much does concrete cutting cost in Seymour, IN?
Professional saw cutting of concrete slabs usually costs about $4 to $15 per linear foot across the US, and that's for the sawing itself. Thicker or reinforced slabs cost more per foot than easy-to-reach ones, and cutting a wall often runs higher too. I'll give you your own figure in writing after I've seen the job.
What is the best way to cut a door opening in a concrete wall?
Wall sawing is the standard way to cut a door or window opening in an existing concrete or masonry wall. The saw rides a rail bolted to the wall, which keeps the cut straight and controlled, so ask for it by name when you get quotes.
Do you need to scan concrete before cutting it?
Before cutting through a structural or post-tensioned slab or wall, the crew may need to scan it for rebar, pipes, conduit and anything else buried inside. Post-tensioned concrete has steel cables pulled tight inside it, so you don't want a blade finding one by surprise. If your cut goes through a structural slab or wall, expect that step in both the schedule and the estimate.
How do I compare concrete cutting quotes?
Ask each contractor whether hauling the cut pieces is included or just the cuts, what the minimum or trip charge is, whether a scan is in the price and how they collect the slurry. On a short cut, the minimum often sets the price more than the per-foot rate. For a basement cut, also ask what powers the saw, because a gas engine puts carbon monoxide into a closed room.
Do I need to call 811 before cutting concrete in Indiana?
Yes, if the job includes digging once the concrete is out, like a trench for a drain line. Indiana law requires everyone who digs to contact Indiana 811 at least two full working days before starting, so build that wait into your start date. Permits are handled by the city or county where your property sits, so we check with that office before we schedule and tell you plainly who will take care of the paperwork.
Can you cut a round hole in concrete for a pipe or drain?
Yes, round holes for pipes, drains, conduit and mechanical lines are normally core drilled rather than sawed. A core drill bores a clean round plug out of the slab or wall, so the opening fits the pipe instead of being chipped out by hand.
Get your concrete cut on the calendar
Call (812) 271-8146 or send the form, because when the cut is scheduled early, the new pour or the plumber isn't left waiting on it.